Contact
Institute of Applied Mechanics Brno, Ltd.
St. Resslova 972/3
602 00 Brno-střed
Czech Republic
ID:
60715871
VAT no:
CZ60715871
Company is registered in the Commercial Register kept at the Regional Court in Brno, section C, insert 16049.
Management
Ing. Lubomír Junek, Ph.D.
General Manager
Ing. Libor Vlček, Ph.D.
Deputy General Manager and Managing Director
Team leaders
Ing. Václav Hrnčíř
Head of Economic Department
Ing. Adam Civín, Ph.D.
Researcher
Ing. Jiří Hůlka, Ph.D.
Researcher
Ing. Lukáš Joch
Researcher
Ing. Ladislav Jurášek, Ph.D.
Researcher
Ing. Petr Klaška
Researcher, Project Manager
Ing. Aleš Lička
Researcher
Ing. Lenka Malčíková
Head of Technical Archive
Ing. Martin Vašek, Ph.D.
Researcher
Our employees
Ing. Vladimír Diviš, Ph.D.
Researcher
PdD thesis
Numerical FEM Analyses in Welding Technology (Brno University of Technology, Faculty of Mechanical Engineering)
Field of work
• Numerical analyses of welding processes (thermal-structural analyses and mechanical-structural analyses)
• Assessment of fatigue lifetime of welded structures
• Numerical analyses of thermal treatment (annealing, hardening, case-hardening, etc.)
• Dealing with problems concerning distortions of welded and thermally treated parts
PdD thesis
Fittings as a source of pressure pulsations (Brno University of Technology, Faculty of Mechanical Engineering, 2018)
Field of work
• Diagnostic
• Measurement of flow, cavitation and dynamic properties of hydraulic machines and hydrotechnical
• Measuring the dynamics of power machines and equipment
• Experimental Mechanics
• Calculation of measurement uncertainty
Ing. Jiří Fischer, Ph.D.
Researcher
Field of work
• Static analyses
Bc. Jiří Franěk
Technician
Field of work
• Data processing support
Mgr. Hana Hrstková
Assistant
Ing. Michal Chlud, Ph.D.
Researcher
PdD thesis
Computational and Experimental Analysis of New Types of Hydrodynamic Dampers (Brno University of Technology, Faculty of Mechanical Engineering, 2015)
Field of work
• Linear and non-linear static and dynamic analyses by means of the finite element method using the ANSYS and AutoPIPE software
• Natural and forced vibrations of damped and non-damped systems
• Response of structures to seismic excitation (response spectrum method, excitation given by accelerograms)
• Body-liquid interaction problems (vibration of structures in liquids, loading by hydrodynamic forces induced by fluid flow)
Ing. Markéta Jakšová
Accountant
Ing. Lukáš Junek
Computing procedures developer
Field of work
• Developer of information systems for nuclear and conventional power plants
• Software developer for technical monitoring of conventional power plants and heating plants
Jiří Karafiát
Technician
Ing. Klára Kotassková
Researcher
Field of work
• Statistical data analysis – description of the data set, analysis of data relationships in data file, editing and transformation of data, graphic presentation of data, identification of outliers, one-sample and two-sample tests, hypothesis testing, analysis of binary and ordinal data - contingent spreadsheet, trend evaluation, data prediction, time series analysis (SW IBM SPSS STATISTIKA)
• Data mining – decision tree techniques, regression analysis, correlation analysis, cluster analysis, Monte Carlo method, Bayesian networks (SW IBM SPSS MODELER)
• Risk analysis – system description, hazard identification, analysis probabilities, consequence analysis, risk estimation, risk evaluation, determination of acceptable risk
Ing. Libor Kozina
Researcher
Field of work
• Software support of calculations in the field of mechanics of bodies
• Participation in the development of the Dialife® program, evaluation of damage to monitored components of nuclear power plants
• Software support of measured data processing
Ing. Roman Krautschneider, Ph.D.
Researcher
PdD thesis
Solving Residual Stresses in Al-alloys Using Experiment and Simulation (Brno University of Technology, Faculty of Mechanical Engineering, 2006)
Field of work
• Fluid flow analyses (Computational Fluid Dynamics CFD)
• Multiple-phase flow and phase transformations
• Thermal fatigue calculations at places of media mixing of various temperatures
• Flow-induced vibrations of structures
• Assessment of residual lifetime of components
Roman Malý
Technician
Ing. Vojtěch Man, Ph.D.
Researcher
PdD thesis
Exploitation of Experiments for Improvement of Level Constitutive Models of Aortic Aneurysm Tissues (Brno University of Technology, Faculty of Mechanical Engineering, 2012)
Field of work
• Static analyses
Ing. Michal Matug, Ph.D.
Researcher
PdD thesis
Compensatory vocal folds for source voice generation: Computational modeling of vocal folds function (Brno University of Technology, Faculty of Mechanical Engineering, 2015)
Field of work
• Static and dynamic calculations by means of the finite element method using the ANSYS software
• Stress analyses of steel structures
• Thermal analyses of steel structures
Kateřina Nejezchlebová
Researcher
Field of work
• Participation in the development of the Dialife® program, evaluation of damage to monitored components of nuclear power plants
Ing. Vladimír Netopil
Researcher
Field of work
• Numerical analyses of welding processes (thermal-structural analyses and mechanical-structural analyses)
• Assessment of fatigue lifetime of welded structures
• Numerical analyses of thermal treatment (annealing, hardening, case-hardening, etc.)
• Dealing with problems concerning distortions of welded and thermally treated parts
Ing. Tomáš Novák
Mechanical engineer
Field of work
• Leakage tests
Ing. Anna Vaculková Polišenská
Researcher
Field of work
• Structural analysis
• Software support for strength analysis
Ing. Jakub Sabela
Researcher
Field of work
• Analysis of degradation processes of pressure equipment
Miroslav Sehnal
Technician
Magda Siváková
Office Manager
Ing. Martin Stodola, Ph.D.
Researcher
PdD thesis
Determination of changes in the mechanical properties of weld materials based on hardness test (Brno University of Technology, Faculty of Mechanical Engineering, 2016)
Field of work
• Static and dynamic calculations by means of the finite element method using the ANSYS software
• Residual lifetime assessment of components using the STATES program
• Stress analyses of steel structures
• Thermal analyses of steel structures
Tomáš Tenora
Technician
Ing. Dušan Tichoň
Researcher
Field of work
• Static analyses
Bc. Jan Trávníček
Technician
Ing. Jiří Valášek, Ph.D.
Researcher
PdD thesis
Biomechanical study of the facial skeleton (Brno University of Technology, Faculty of Mechanical Engineering, 2016)
Field of work
• Static and dynamic calculations by means of the finite element method using the ANSYS software
Ing. Pavel Vejvoda
Developer
Field of work
• Developer of information systems for nuclear and conventional power plants
• Software developer for technical monitoring of conventional power plants and heating plants
Ing. Dagmar Vejvodová
Chief Accountant
Ing. Tereza Vorlová
Researcher
Field of work
• Static analyses
Ing. Jiří Zima
Researcher
Field of work
• Strength and lifetime analyses of pressure and non-pressure equipment for nuclear power generation
• Assessment of flow induced vibrations of pipe systems
• Standards applied: especially NTD A.S.I., ASME, and other to customer requirement
Tereza Ždánská
Assistant